Wire EDM -Standard-range machines - ONA AF Series

 

 

Wire EDM -Standard-range machines - onA AF Series

Characteristics

• Máximum productivity. The onA AF machines are noted for the high cutting speed (42 in²/minute with wire of 0.013 in diameter) and low maintenance costs, thanks to the ecological filtration system, onA AquaPrima, which does not require replaceable cartridges.
• Surface integrity 100% preserved. The onA AF series includes the onA Easycut generator, which provides a cut that is 100% free from electrolyte corrosion, without affecting the speed, and while preserving the surface integrity of the material being cut (best surface finish: 0.2 µm Ra – 6 VDI).
• 6 axes controlled by the CNC. The AF models incorporate the latest generation CNC, onA-W64, able to control 6 axes, 5 of them (B, X, Y, U, V) at the same time, enabling the machine to incorporate a rotation axis which is totally controlled by the CNC.
• Great versatility. Also of note is the huge versatility offered by this new family of machines for a large variety of tasks, as they are designed to operate with any type of wire; from 0.004 in to 0.013 in diameter.

Specifications

AF Standard		AF25	AF35
X-axis travel (in)		15.7	23.6
Y-axis travel (in)		11.8	15.7
Z-axis travel (in)		9.8	15.7
Worktank internal dimension	Wide (in)	27.6	41.7
	Deep (in)	25.6	29.5
	High (in)	9.8	15.7
UN-axes traves (in)		4.7 x 4.7	4.7 x 4.7
Maximum taper angle (º)		± 30º / 3.4 in	± 30º / 3.4 in
Wire diameter range (in)		0.004 - 0.013	0.004 - 0.013

Additional Elements:

Erosion EXPERT SYSTEM	Standard
"Automatic Strategy" (eliminates G-code programming)	Standard
CAD CAM software ESPRIT GOLD	Optional
Patented mineral filtering system (no maintenance)	Optional
Programmable "Z" axis positioning	Standard
Programmable dielectric-fluid pressure	Standard
Full automatic wire threading (AWT) and rethreading	Standard
Wire chopper	Optional
Hand controller	Standard
35 lb wire spool capacity	Standard
Upper and lower head collision protection	Standard